- ArcValidator
- CNC MACHINE AUTOMATION
- DRILLING & BEVELING
- HYPERTHERM PLASMA CUTTING MACHINE
- OXYFUEL EQUIPMENT
- POWER TOOLS
- ROBOTIC WELDING SYSTEM
- SAFETY
- SOFTWARE
- WELDING CONSUMABLES AND ACCESSORIES
- WELDING MACHINE
Amcoweld (M) Sdn Bhd
Head Off : Setia Business Park II, 16, Jalan Perniagaan Setia 7, Taman Perniagaan Setia, 81100 Johor Bahru, Johor, Malaysia.
KL Off : NO. 7, Jalan Sungai Beting 3/KU3, Off Jalan Sungai Putus, 42100 Klang, Selangor, Malaysia.
Amcoweld Inc Pte. Ltd. Blk 1005 Eunos Ave 7, #01-06/08, Singapore 409576.
Pt. Amcoweld Indonesia Komplek Pertokoan Dian Centre, Block C No.12A, Batam, Indonesia.
Amcotech Vietnam Co., Ltd 37 Ton Duc Thang Street, 19th floor Suite 1901, Saigon, Trade Center, District 1., Ho Chi Minh City, Vietnam.
HYPERTHERM Powermax105®
Previous | 2 / 7 | Next |
hypertherm PMX105 Plasma Cutting machine
- Fast cut speeds: three times faster than oxyfuel on 12 mm (½”) mild steel.
- Superior cut and gouge quality means less time spent on grinding and edge preparation.
Easy-to-use for cutting and gouging
- Smart Sense™ technology automatically sets correct air pressure based on torch length and operating mode.
- Handheld, straight machine and robotic torches for greater versatility and ease-of-use.
- Wide voltage tolerance improves performance on motor generators and in low-line conditions.
- Improved shield reduces dross buildup and enables smoother drag cutting for a better cut.
Built and tested to withstand the harshest conditions
- Duramax™ torches are designed for high impact and heat-resistance.
- SpringStart™ technology ensures consistent starting and a more reliable torch.
- Low maintenance for maximum uptime – it keeps on going.
Low operating cost
- Long consumable life for lower cost and more uptime.
- Exclusive electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
- High power efficiency lowers energy consumption.
Specifications
Input voltages |
CSA 200 – 600 V / 3-PH / 50/60 Hz CE 230 – 400 V / 3-PH / 50/60 Hz CE 400 V / 3-PH / 50/60 Hz CCC 380 V / 3-PH / 50/60 Hz |
Input current @ 16.8 kW |
CSA 200/208/240/480/600 V / 3-PH 58/56/49/25/22 A CE 230/400 V / 3-PH / 50/29 A CE 400 V / 3-PH / 28 A CCC 380 V / 3-PH / 30 A |
Output current | 30 – 105 A |
Rated output voltage | 160 VDC |
Duty cycle @ 40° C (104° F) |
CSA 200-600 V 70% @ 105 A / 240 V / 3-PH 80% @ 105 A / 480–600 V / 3-PH 100% @ 94 A / 480–600 V / 3-PH 100% @ 88 A / 240 V / 3-PH CE 230-400 V 70% @ 105 A / 230 V / 3-PH 80% @ 105 A / 400 V / 3-PH 100% @ 94 A / 400 V / 3-PH 100% @ 88 A / 230 V / 3-PH CE 400 V 80% @ 105 A / 400 V / 3-PH 100% @ 94 A / 400 V / 3-PH CCC 380 V 80% @ 105A / 380 V / 3-PH 100% @ 94 A/ 380 V / 3-PH |
Open circuit voltage (OCV) |
CSA (200 – 600 V) 300 VDC / CE (230 – 400 V) 288 VDC CE (400 V) 292 VDC / CCC (380 V) 280 |
Dimensions with handles |
592 mm (23.3'') D; 274 mm (10.8'') W; 508 mm (20.0'') H |
Weight with 7.6 m (25') torch |
CSA 45 kg (100 lbs) CE 45 kg (100 lbs) (230 – 400 V) CE 41 kg (91 lbs) (400 V) CCC 41 kg (91 lbs) |
Gas supply | Clean / dry / oil-free air or nitrogen |
Recommended gas inlet flow rate / pressure |
Cutting: 217 l/min (460 scfh / 7.7 scfm) @ 5.9 bar (85 psi) Gouging: 227 l/min (480 scfh / 8.0 scfm) @ 4.8 bar (70 psi) |
Input power cable length | 3 m (10') |
Power supply type | Inverter – IGBT |
Engine-driven generator operation
Engine drive rating (kW) | System output (amps) | Performance (arc stretch) |
---|---|---|
30 | 105 | Full |
22.5 | 105 | Limited |
22.5 | 85 | Full |
15 | 85 | Limited |
15 | 65 | Limited |
Maximum cut speed
Material | Current (amps) |
Metric unit Thickness (mm) |
Metric unit Maximum cut speed¹ (mm/min) |
Imperical unit Thickness (inches) |
Imperical unit Maximum cut speed¹ (ipm) |
---|---|---|---|---|---|
Mild steel | 45 | 3 | 6150 | 10 GA | 205 |
Mild steel | 105 | 6 | 6360 | 1/4 | 240 |
Mild steel | 105 | 12 | 2580 | 1/2 | 95 |
Mild steel | 105 | 20 | 1180 | 3/4 | 50 |
Mild steel | 105 | 25 | 780 | 1 | 30 |
Mild steel | 105 | 32 | 500 | 1-1/4 | 20 |
Stainless steel | 105 | 6 | 7500 | 1/4 | 280 |
Stainless steel | 105 | 12 | 2330 | 1/2 | 85 |
Stainless steel | 105 | 20 | 990 | 3/4 | 42 |
Stainless steel | 105 | 25 | 660 | 1 | 25 |
Aluminum | 105 | 6 | 8330 | 1/4 | 330 |
Aluminum | 105 | 12 | 3070 | 1/2 | 114 |
Aluminum | 105 | 20 | 1470 | 3/4 | 62 |
Aluminum | 105 | 25 | 970 | 1 | 37 |
¹ Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance , actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
Operating Data
Capacity | Thickness | Cut speed |
Handheld cut | - | |
Recommended | 1-1/4'' (32 mm) | 20 ipm (500 mm/min) |
1-1/2'' (38 mm) | 10 ipm (250 mm/min) | |
Severance | 2'' (50 mm) | 5 ipm (125 mm/min) |
Pierce | 7/8'' (22 mm)* | - |
Metal removal rate | Groove profile | |
Gouge capacity | - | |
21.7 lbs. (9.8 kg) per hour | .25'' (6.4 mm) D x .29'' (7.4 mm) W |
Ordering Information
Standard configurations
Below are some of the most common system configurations which include a power supply , torch and work cable. Additional configurations are listed on our website.
Input voltages |
Handheld systems Standard power supply 75° hand torch 7.6 m (25') |
Handheld systems Standard power supply 75° hand torch 15.2 m (50') |
Handheld systems Power supply with CPC port and selectable voltage ratio 75° hand torch 7.6 m (25') |
Handheld systems Power supply with CPC port and selectable voltage ratio 75° hand torch 15.2 m (50') |
Mechanized systems Power supply with CPC port and selectable voltage ratio 180° full-length machine torch 7.6 m (25') |
Mechanized systems Power supply with CPC port and selectable voltage ratio 180° full-length machine torch 15.2 m (50') |
---|---|---|---|---|---|---|
200 – 600 V CSA² | 059374 | 059375 | 059376 | 059377 | 059378 | 059379 |
230 – 400 V CE³ | 059394 | 059395 | 059396 | 059397 | 059398 | 059399 |
400 V CE³ | 059414 | 059415 | 059416 | 059417 | 059418 | 059419 |
380 V CCC⁴ | 059434 | 059435 | 059436 | 059437 | 059438 | 059439 |
² For use in the Americas and Asia , except China.
³ For use in countries that require CE or GOST marks.
⁴ For use in China.
Custom configurations
Power supply options
Standard power supply |
Power supply with CPC port and selectable voltage ratio |
Power supply with CPC port / selectable voltage ratio and serial interface port (RS-485) |
|
---|---|---|---|
200 – 600 V CSA | 059370 | 059371 | 059372 |
230 – 400 V CE | 059390 | 059391 | 059392 |
400 V CE | 059410 | 059411 | 059412 |
380 V CCC | 059430 | 059431 | 059432 / 059433⁵ |
⁵ Does not include a power cord.
Starter consumable kit options
Handheld | Mechanized | Mechanized with ohmic retaining cap | |
---|---|---|---|
Kit | 228849 | 228848 | 228969 |
Component options
Cable length |
Torches Hand 75° |
Torches Hand 15° |
Torches Machine 180° |
Torches Machine Mini 180° |
Torches Robotic 45° |
Torches Robotic 90° |
Torches Robotic 180° |
Work cables Hand clamp |
Work cables C-style clamp |
Work cables Ring terminal |
Control cables Remote pendant |
Control cables CNC spade plug⁶ |
Control cables CNC spade plug⁷ |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4.5 m (15') | – | – | 059476 | 059481 | – | – | – | – | – | – | – | – | – |
7.6 m (25') | 059473 | 059470 | 059477 | 059482 | 059464 | 059465 | 059466 | 223254 | 223287 | 223284 | 128650 | 228350 | 023206 |
10.7 m (35') | – | – | 059478 | 059483 | – | – | – | – | – | – | – | – | – |
15.2 m (50') | 059474 | 059471 | 059479 | 059484 | – | – | – | 223255 | 223288 | 223285 | 128651 | 228351 | 023279 |
22.8 m (75') | 059475 | 059472 | 059480 | – | – | – | – | 223256 | 223289 | 223286 | 128652 | – | – |
Torch Consumable Parts
Nozzles and electrodes are available in various quantities. Contact your distributor for more information.
Consumable type | Torch type | Amperage | Nozzle | Shield/Deflector | Retaining cap | Electrode | Swirl ring |
---|---|---|---|---|---|---|---|
Drag-cutting | Hand | 45 | 220941 | 220818 | 220854 | 220842 | 220857 |
Drag-cutting | Hand | 65 | 220819 | 220818 | 220854 | 220842 | 220857 |
Drag-cutting | Hand | 85 | 220816 | 220818 | 220854 | 220842 | 220857 |
Drag-cutting | Hand | 105 | 220990 | 220992 | 220854 | 220842 | 220994 |
Mechanized | Machine | 45 | 220941 | 220817 or 220955⁸ | 220854 or 2209539⁹ | 220842 | 220857 |
Mechanized | Machine | 65 | 220819 | 220817 or 220955⁸ | 220854 or 2209539⁹ | 220842 | 220857 |
Mechanized | Machine | 85 | 220816 | 220817 or 220955⁸ | 220854 or 2209539⁹ | 220842 | 220857 |
Mechanized | Machine | 105 | 220990 | 220993 or 220955⁸ | 220854 or 2209539⁹ | 220842 | 220994 |
FineCut® | Hand | 45 | 220930 | 220931 | 220854 or 220953 (ohmic) | 220842 | 220947 |
FineCut® | Machine | 45 | 220930 | 220948 | 220854 or 220953 (ohmic) | 220842 | 220994 |
Gouging | Hand | – | 220991 | 220798 | 220854 | 220842 | 220994 |
Gouging | Machine | – | 220991 | 220798 | 220854 | 220842 | 220994 |